LM 250 Equipment lifting
LM 250 Equipment lifting
0,00€
The LM 250 Equipment lifting is a through wire rope lift that allows the transfer and lifting of loads with a maximum capacity of 250 Kg.
With no working height limit, the LM 250 is used in different sectors, including the elevator industry, construction and civil works, as well as in maintenance work on shafts and wind towers.
The LM 250 Through Wire Rope Hoist has its outside walls made of 100% aluminium. This makes it lightweight, compact, and corrosion resistant. It is equipped with a temperature probe that protects the electric motor and stops the hoist in case of overheating.
It is a portable device, easy to handle, transport, and install. It has a button panel or radio control and a storage box. It has a lifting speed of 6m/min and the possibility of increasing the load capacity up to 500 Kg by using a forwarding kit (double rope).
It is delivered with its corresponding EC declaration of conformity for lifting loads and its use and assembly manual, as required by European Directive 2006/42/EC.
Summary table of basic characteristics of the LM 250 Equipment lifting:
 Max. load capacity |
250 Kg |
| Max. load capacity reeved |
500 Kg |
 Enginee power |
0.45 kW |
| Voltage |
Monofásico 230 v-50Hz - 3.5 A |
 Top and bottom limit switch |
Sí |
 Lifting speed |
6 m/min |
 Total weight |
19 kg |
 Wire diameter |
5 mm |
