BRAKOO davit with perpendicular rail beam

BRAKOO davit with perpendicular rail beam

0,00

The BRAKOO davit with LONGITUDINAL rail beam from Accesus is a special davit based on the more straightforward and lower height configurations of the BRAKOO davit type 1A or 1B.

In this case, the BRAKOO davit is installed on steel rail beams perpendicular to the davit arm, allowing the davit to be moved around the entire perimeter of a building’s roof. This model is adaptable for rails with IPN-140 beams, although the equipment can be adapted to other types of railings.

If we look at the load capacity that it can support, the BRAKOO davit on the perpendicular rail beam is officially approved to suspend suspended scaffolding with lifts with a maximum load capacity of 300, 400, or 500 kg.

BRAKOO davit with LONGITUDINAL rail beam needs two operators, although it is very fast using screws and pins that fix the 25 kg counterweights in the davit housings. The flight will vary depending on the BRAKOO davit we are starting from to install it on the vertical rail, but it does not usually rise to over 2 meters. In fact, the most significant flight we build in Accesus is a BRAKOO 1B on a rail, and the maximum flight was 1.75 meters.

Ask here for more information

Made of galvanized steel, it is a davit with excellent resistance to weather and adverse climatic situations.

BRAKOO davit with LONGITUDINAL rail beam is delivered with its corresponding CE certificate and its assembly and use manual, as required by European Directive 2006/42 and EN 1808.

Summary table of basic features of the BRAKOO davit with perpendicular rail beam:

Max. load capacity 500 Kg
Cantilever Variable, according to starting model
Height under beam Variable, according to starting model
Material Galvanized steel